ByrdRench - Multi-Tool by Spyderco
As multitools go the byrdRench doesn’t resemble any other pocket tool on the market. Unlike standard multitool fare it has a full-sized knife blade that opens/closes one handed and locks open like a real pocketknife. It also comes with a pocket clip and nylon sheath so if you’re a hang-it-on-a-belt-loop person or a clip-in-my-pocket-person, you’re covered.
The tool’s housing is two stainless halves that join creating slip joint pliers (with a large or small bite) on one end and an adjustable 9/16” crescent wrench on the opposite end. Both work comfortably in the hand with contoured edges so there are no pinched fingers.
- Features:
- Full-sized 8Cr13MoV locking blade.
- Pocket-carry steel clip or belt-carry nylon sheath.
- Slip joint pliers.
- Adjustable 9/16" wrench.
- Magnetized screwdriver with #2 and #3 flat-head bits.
- File/hole-starter.
- Rotates/locks open for full.
- Separates for independent tool usage.
Details: Separate the two halves and
tucked inside is a set of four screwdriver bits including: A #2 and #3 Phillips-head
as well as a #1 and #2 flat-head. The bit housing accepts any standard 1/4" sized
bit including Allen and Torx® wrenches to customize your tool arsenal. A rough
file combination hole-starter slide into a spring set in the housing above
the bits. A pivot holds the tool’s two halves together. When rotated, the pieces
extend and lock into a full-length easy to grip and torque magnetized screwdriver
or crescent wrench. Releasing the pivot separates the screwdriver and knife
portion of the tool from the crescent wrench. This allows you to use the crescent
wrench and the screwdriver/knife independently and/or simultaneously. High
performance 8Cr13MoV is the blade’s steel and it comes in a plain cutting edge.